 |
| Quantity: | |
|---|---|
ASTM A234 WPB 45 Degree Elbow
ASTM A234 WPB 45 degree elbow is used to connect tubes at a 45 degree pipe angle. As the name suggests, this is a pipe fitting device which is bent in such a way to produce 45 degree change in the direction of flow of the fluid/gas in the pipe.
Like a 90 degree elbow, the 45 degree pipe elbow also attaches readily to pipes of various materials like plastic, copper, cast iron, steel, lead, rubber etc. They are typically made as LR (Long Radius) elbows. These types of elbows are available in various sizes (in mm or inches). They are available with different male to female BSP thread connections. Providing a wide choice of colors, these 45 degree elbows can be manufactured to meet different specifications, in terms of size and diameter.
ASTM A234 WPB 45 degree elbow have same function and usage with 90 degree elbow, but the dimension and shape is half of it. There is long radius only. The material can be carbon steel, alloy steel and stainless steel. It is quite used in multiple industries such as chemical, petroleum, electronic, fluid power, shipyard, oil and gas.
Standard Scope
Butt Weld 45 Degree Elbow production standard is ASME B16.9. The standard includes specifications of NPS 1/2 to NPS 48 (DN15-DN1200) factory-made wrought butt welded pipe fittings overall dimensions, tolerances ratings, test methods and markings.
Supply Range
Standard: ASTM A234, MSS SP-75, ASTM A403, ASTM A420
Types: Elbow, Tee Equal and Reducing, Cap, Concentric/Eccentric Reducer
Size Range: 1/2" - 48"
Thickness: SCH 10, SCH 40, SCH 80,SCH160,SCH XXS
Units
Units under ASME B16.9 shall be stated in both SI (Metric) and U.S. Customary units. Designation for size is NPS.
Is a 45 Degree Elbow Better Than a 90 Degree Elbow?
Which degree of pneumatic conveying elbow you choose for your system will depend on the kind of material you convey. Since a 45 degree elbow has greater impact resistance, it might be more suitable for heavier materials like coal or mining products. On the other hand, the abrasion-resistant qualities of a 90 degree elbow make it a good fit for plastics, foodstuffs, and fine powders.
But no matter what you convey, one of the most influential factors in your decision will be your available floor space. If you have room to spare, the greater spatial requirements of a 45 degree elbow won’t be a problem. If space is limited and you need a compact system, a 90 degree elbow might be better.
What is ASTM A234 WPB
ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services. It covers steel fittings of seamless and welded types. Steel Pipe fittings are applied in pressure pipelines and in pressure vessel fabrications. These fittings material consist of killed steel, forgings, bars, plates, seamless or HFW (fusion welded) pipe products, with filler metal added.
ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.
As we know, ASTM A234 steel pipe fittings are used in pressure piping and in pressure vessel fabrication, for services at moderate and elevated temperatures. The fittings material in this standard consist of killed steel, forgings, bars, plates, seamless or fusion-welded tubular products with filler metal added.
In this standard it covers the specification of elbows, tees, reducers, caps and cross, it usually adopt butt welding ends.
Chemical Composition
| CHEMICAL | LIMITS | C | Mn | P | S | Si | Cr | Mo | Ni | Cu | V |
| ASTM A234 WPB | MIN | 0.29 | 0.10 | ||||||||
| MAX | 0.30 | 1.06 | 0.050 | 0.058 | 0.40 | 0.15 | 0.40 | 0.40 | 0.08 |
Mechanical Properties
| MATERIAL | T.S (MPA) | Y.S (MPA) | EL % | R/A % | HARDNESS |
| ASTM A234 WPB | 415 min | 240 min | 22 min | 30 min | 197 max |
ASTM A234 WPB 45 degree elbow is a fitting that changes the direction of material flow within your pipelines by 45 degrees. The shallower angle of a 45 degree elbow reduces product impact against the pipe wall. This protects both your components and dry bulk material from damage. It also reduces the amount of energy and speed lost during transfer, lowering the energy requirements of your system.
Advantages
One of the top advantages of using ASTM A234 WPB 45 degree elbow in construction and infrastructure projects is its versatility. It can be used in many applications and with various pipe materials such as copper, steel, and alloy. This means the 45 degree butt weld elbow can accommodate numerous pipe sizes and types, making it an ideal solution for many plumbing applications.
Improved Water Flow
Another benefit of using a 45-degree elbow in construction and infrastructure projects is improved water flow. The fitting allows water to flow more smoothly, reducing the chances of clogs and other related plumbing issues. By improving water flow, the 45 degree elbow helps maintain the plumbing system’s integrity and prolong its lifespan.
Easy Installation
Installing a 45 degree elbow is relatively straightforward and requires minimal effort. The fitting can be easily integrated into existing plumbing systems, saving time and labor costs. Furthermore, its design provides a leak-proof and secure connection, reducing the chances of plumbing leaks and water damage
ASTM A234 WPB 45 Degree Elbow
ASTM A234 WPB 45 degree elbow is used to connect tubes at a 45 degree pipe angle. As the name suggests, this is a pipe fitting device which is bent in such a way to produce 45 degree change in the direction of flow of the fluid/gas in the pipe.
Like a 90 degree elbow, the 45 degree pipe elbow also attaches readily to pipes of various materials like plastic, copper, cast iron, steel, lead, rubber etc. They are typically made as LR (Long Radius) elbows. These types of elbows are available in various sizes (in mm or inches). They are available with different male to female BSP thread connections. Providing a wide choice of colors, these 45 degree elbows can be manufactured to meet different specifications, in terms of size and diameter.
ASTM A234 WPB 45 degree elbow have same function and usage with 90 degree elbow, but the dimension and shape is half of it. There is long radius only. The material can be carbon steel, alloy steel and stainless steel. It is quite used in multiple industries such as chemical, petroleum, electronic, fluid power, shipyard, oil and gas.
Standard Scope
Butt Weld 45 Degree Elbow production standard is ASME B16.9. The standard includes specifications of NPS 1/2 to NPS 48 (DN15-DN1200) factory-made wrought butt welded pipe fittings overall dimensions, tolerances ratings, test methods and markings.
Supply Range
Standard: ASTM A234, MSS SP-75, ASTM A403, ASTM A420
Types: Elbow, Tee Equal and Reducing, Cap, Concentric/Eccentric Reducer
Size Range: 1/2" - 48"
Thickness: SCH 10, SCH 40, SCH 80,SCH160,SCH XXS
Units
Units under ASME B16.9 shall be stated in both SI (Metric) and U.S. Customary units. Designation for size is NPS.
Is a 45 Degree Elbow Better Than a 90 Degree Elbow?
Which degree of pneumatic conveying elbow you choose for your system will depend on the kind of material you convey. Since a 45 degree elbow has greater impact resistance, it might be more suitable for heavier materials like coal or mining products. On the other hand, the abrasion-resistant qualities of a 90 degree elbow make it a good fit for plastics, foodstuffs, and fine powders.
But no matter what you convey, one of the most influential factors in your decision will be your available floor space. If you have room to spare, the greater spatial requirements of a 45 degree elbow won’t be a problem. If space is limited and you need a compact system, a 90 degree elbow might be better.
What is ASTM A234 WPB
ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services. It covers steel fittings of seamless and welded types. Steel Pipe fittings are applied in pressure pipelines and in pressure vessel fabrications. These fittings material consist of killed steel, forgings, bars, plates, seamless or HFW (fusion welded) pipe products, with filler metal added.
ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.
As we know, ASTM A234 steel pipe fittings are used in pressure piping and in pressure vessel fabrication, for services at moderate and elevated temperatures. The fittings material in this standard consist of killed steel, forgings, bars, plates, seamless or fusion-welded tubular products with filler metal added.
In this standard it covers the specification of elbows, tees, reducers, caps and cross, it usually adopt butt welding ends.
Chemical Composition
| CHEMICAL | LIMITS | C | Mn | P | S | Si | Cr | Mo | Ni | Cu | V |
| ASTM A234 WPB | MIN | 0.29 | 0.10 | ||||||||
| MAX | 0.30 | 1.06 | 0.050 | 0.058 | 0.40 | 0.15 | 0.40 | 0.40 | 0.08 |
Mechanical Properties
| MATERIAL | T.S (MPA) | Y.S (MPA) | EL % | R/A % | HARDNESS |
| ASTM A234 WPB | 415 min | 240 min | 22 min | 30 min | 197 max |
ASTM A234 WPB 45 degree elbow is a fitting that changes the direction of material flow within your pipelines by 45 degrees. The shallower angle of a 45 degree elbow reduces product impact against the pipe wall. This protects both your components and dry bulk material from damage. It also reduces the amount of energy and speed lost during transfer, lowering the energy requirements of your system.
Advantages
One of the top advantages of using ASTM A234 WPB 45 degree elbow in construction and infrastructure projects is its versatility. It can be used in many applications and with various pipe materials such as copper, steel, and alloy. This means the 45 degree butt weld elbow can accommodate numerous pipe sizes and types, making it an ideal solution for many plumbing applications.
Improved Water Flow
Another benefit of using a 45-degree elbow in construction and infrastructure projects is improved water flow. The fitting allows water to flow more smoothly, reducing the chances of clogs and other related plumbing issues. By improving water flow, the 45 degree elbow helps maintain the plumbing system’s integrity and prolong its lifespan.
Easy Installation
Installing a 45 degree elbow is relatively straightforward and requires minimal effort. The fitting can be easily integrated into existing plumbing systems, saving time and labor costs. Furthermore, its design provides a leak-proof and secure connection, reducing the chances of plumbing leaks and water damage
