Stainless Steel Socket Weld Cap

What is Socket Weld Cap

Socket Weld Cap is a piece of pipe fitting that is used usually to seal the open end of a pipe. The ASME B16.11 cap sizes range up to 4 inches in diameter. The caps are used commonly in small size pipes. The socket weld cap dimensions vary according to the pipe system they are used in. The socket weld pipe cap has a socket on the opening end. The closing end is closed so that the socket can cover the opening of the pipe and seal it completely and tightly. The socket weld end cap can differ in size and type.

The Forged Socket weld Cap is forged and is heat treated during production so that the pressure containment capacity could be high in types such as 3000LB Socket Weld Forged Pipe Cap. The Socket weld Pipe Cap provides extra grip and sealing to the closing of a pipeline.

Many materials can make into Socket weld Cap just, for example Stainless Steel Socket Weld Cap, Carbon Steel Socket Weld Cap, Alloy Steel Socket Weld Cap could apply for the correct requirements in many industries just like water lining, pollution control, petroleum industries and more than there.The most used material is Stainless Steel Socket Weld Cap, the dimensions and materials vary according to applications but the Forged Socket Weld Cap is a small pipe fitting that is so important in many piping projects.

Stainless Steel Socket Weld Cap

The Stainless Steel Socket Weld Cap provide a secure and leak proof seal, essential in applications where fluid or gas must be contained within the piping system. Another benefit is that they can offer better resistance to corrosion than threaded caps. Moreover, the socket weld caps is more easy to install.

The materials of stainless steel socket weld caps as below:
ASTM A182 F304, F304L, F306, F316L, F304H, F309S, F309H, F310S, F310H, F316TI, F316H, F316LN, F317, F317L, F321, F321H, F11, F22, F91, F347, F347H, F454L, ASTM A312/A403 TP304, TP304L, TP316, TP316L

Dimension Of Socket Weld Cap

The socket weld cap dimensions can determine the pressure and stress they can withhold. The smaller cap standard like ASME B16.11 just like the socket weld cap commonly apply for domestic water linings project.  

Stainless Steel Socket Weld Cap Weight

Stainless Steel Socket Weld Cap Application

The socket welded caps have a reputation for providing exceptional performance and are typically created to match demands. The standard of forged socket weld caps are used in a abundant of industries as follows:

· Oil and Gas

· Chemical Industry

· Water Supply Systems

· Power Plants

· Paper and Pulp Industry

Inspection Procedure Of Socket Weld Cap

The most popular method for evaluating the quality of socket fusion welds’ quality is visual inspection. Another is use radio graphic inspection for socket weld cap what is commonly done to check internal voids. Mostly apply for Stainless Steel Socket Weld Cap, Carbon Steel Socket Weld Cap, Low Temperature Socket Weld Cap and so on.

The inspection procedure is as below:

Verify that the beads between the pipe and the fitting are uniform on both sides of the joint. There shouldn’t be any creases or breaks in the beads.

• Check the weld beads for deterioration or contamination signs.

• Check to see if the pipe and fitting need to be appropriately aligned.

• Check the heated tool for material degradation signs.