Size Range: 1/2" - 80" / DN15 - 2000
Thickness Schedule: SCH 10 - SCH 160, XXS
Standard: ANSI / ASME B16.9 / MSS SP 43
Size Range: 1/2" - 80" / DN15 - 2000
Thickness Schedule: SCH 10 - SCH 160, XXS
Standard: ANSI / ASME B16.9 / MSS SP 43
Size Range: 1/2" - 48" / DN15 - 1200
Thickness Schedule: SCH 10 - SCH 160, XXS
Standard: ANSI / ASME B16.9
We are a manufacturer, supplier and exporter of ASME B16.9 butt weld equal and reducing tee in China.
ANSI / ASME B16.9 steel pipe tee dimensions and weight chart is free for you.
Shape Type: Equal and Reducing
Size Range: 1/2" - 80" / DN15 - 2000
Thickness Schedule: SCH 10 - SCH 160, XXS
Standard: ANSI / ASME B16.9
Type: Long Pattern (LP) and Short Pattern (SP)
Size Range: 1/2” - 24” / DN15 - 600
Thickness Schedule: SCH 10 - SCH 160, XXS
Size Range: 3/4" - 60" / DN20 - 1500
Thickness Schedule: SCH 10 - SCH 160, XXS
Standard: ANSI / ASME B16.9 / MSS SP 43
Size Range: 3/4" - 60" / DN20 - 1500
Thickness Schedule: SCH 10 - SCH 160, XXS
Standard: ANSI / ASME B16.9 & MSS SP-43
Size Range: 1/2" - 48" / DN15 - 1200
Thickness Schedule: SCH 10 - SCH 160, XXS
Standard: ANSI / ASME B16.9
Type: 90 Degree and 45 Degree
Shape: Straight and Reducing Elbow
Size: 1/8” – 4” / DN6 - DN100
Shape: Equal and Reducing Tee
Size: 1/8"- 4" / DN6 - DN100
Pressure: Class 3000LBS, 6000Lbs, 9000lbs.
Standard: ASME B16.11, BS3799
Shape: Equal Cross Tee and Reducing Cross Tee
Size Range: 1/8” – 4” / DN6 - DN100
Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs.
Standard: GB/T 14383, ASME B16.11, BS3799
Type: Full Coupling and Half Coupling
Shape: Straight Coupling and Reducing Coupling
Size Range: 1/8” – 4” / DN6 - DN100
Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs
Size Range: 1/8” - 3” / DN6 - DN80
Pressure Rating: Class 3000lbs
Standard: MSS SP-83
Type: 90 Degree and 45 Degree Elbow
Shape: Straight and Reducing Elbow
Thread Type: NPT, PT, BSPP, BSPT, PF
Shape: Equal and Reducing Tee
Size Range: 1/8” – 4” / DN6 - DN100
Pressure Rating: Class 2000 lbs, 3000 lbs, 6000 lbs
Shape: Equal and Reducing
Size: 1/8" - 4" / DN6 - DN100
Pressure: Class 2000 lbs, 3000 lbs, 6000 lbs
Type: Full and Half Coupling
Shape: Straight and Reducing Coupling
Thread Type: NPT, PT, BSPP, BSPT, PF
Size Range: 1/8” – 4” / DN6 - DN100
Pressure Rating: Class 3000lbs, 6000lbs
Standard: ASME B16.11, BS3799, EN 10241
Size Range: 1/8” - 3” / DN6 - DN80
Pressure Rating: Class 3000lbs
Standard: MSS SP-83
Shape: Equal Cross Tee and Reducing Cross Tee
Size Range: 1/8” – 4” / DN6 - DN100
Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs.
Standard: GB/T 14383, ASME B16.11, BS3799
Availability: | |
---|---|
Quantity: | |
Socket weld cross is also called socket weld four-way fitting that used to make three 90 degree branches from main run pipeline. Both equal and reducing crosses are in various size, dimensions and material. The Socket Weld Fittings Section is designed to hold the various sizes of the pipes it has to be attached to.
Socket Weld Fittings are a family of high pressure forging fittings that used only in conjunction with ANSI Pipe and are available in the same size range.
Even though there are some similarities between the shapes of the two welds, but socket weld is still considered to be different from a fillet weld.
ASME B16.11 Socket Weld Cross Tee Size
Type | Socket Weld Equal and Reducing Cross Tee |
Size Range | 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" |
Pressure Rating | Class 3000 / 6000 / 9000, 3M / 6M / 9M, 3000 LBS / 6000LBS / 9000LBS |
Socket Weld Cross Material
Carbon Steel Grades
ASTM A105 / A105N, A350 LF2/LF3, A694 F42 / F46 / F56 / F60 / F65
Alloy Steel Grades
ASTM A182 F5 / F9 / F11 / F12 / F22 / F91 / F92
Stainless Steel Grades
ASTM A182 F304/304L/304H, F316/316L, F321, F310S, F317, F347, F904L
Duplex Stainless Steel Grades
ASTM A182 F51 / F53 / F44 / F55
ASME B16.11 Socket Weld Cross Dimensions
DN |
NPS | B | D | C | J | ||||||||
3000 | 6000 | 9000 | 3000 | 6000 | 9000 | ||||||||
6 | 1/8 | 10.9 | 6.1 | 3.2 | - | 3.18 | 3.18 | 3.96 | 3.43 | - | - | 9.5 | |
8 | 1/4 | 14.3 | 8.5 | 5.6 | - | 3.78 | 3.30 | 4.60 | 4.01 | - | - | 9.5 | |
10 | 3/8 | 17.7 | 11.8 | 8.4 | - | 4.01 | 3.50 | 5.03 | 4.37 | - | - | 9.5 | |
15 | 1/2 | 21.9 | 15.0 | 11.0 | 5.6 | 4.67 | 4.09 | 5.97 | 5.18 | - | - | 9.5 | |
20 | 3/4 | 27.3 | 20.2 | 14.8 | 10.3 | 4.90 | 4.27 | 6.96 | 6.04 | 9.78 | 8.56 | 12.5 | |
25 | 1 | 34.0 | 25.9 | 19.9 | 14.4 | 5.69 | 4.98 | 7.92 | 6.93 | 11.38 | 9.96 | 12.5 | |
32 | 11/4 | 42.8 | 34.3 | 28.7 | 22.0 | 6.07 | 5.28 | 7.92 | 6.93 | 12.14 | 10.62 | 12.5 | |
40 | 11/2 | 48.9 | 40.1 | 33.2 | 27.2 | 6.35 | 5.54 | 8.92 | 7.80 | 12.7 | 11.12 | 12.5 | |
50 | 2 | 61.2 | 51.7 | 42.1 | 37.4 | 6.93 | 6.04 | 10.92 | 9.50 | 13.84 | 12.12 | 16.0 | |
65 | 21/2 | 73.9 | 61.2 | - | - | 8.76 | 7.62 | - | - | - | - | 16.0 | |
80 | 3 | 89.9 | 76.4 | - | - | 9.52 | 8.30 | - | - | - | - | 16.0 | |
100 | 4 | 115.5 | 100.7 | - | - | 10.69 | 9.35 | - | - | - | - | 19.0 |
1) The even thickness around the socket bore shall not be less than the average value, the thickness at partial areas can be the min. one.
2) Considering the tolerance of outside diameter of pipe, the diameters of some socket bore can be a little larger than the ones specified in B16.11.
3) When the sizes of the connecting pipes aren t conformed to the ones specified in this catalog, the sizes of the connecting pipes shall be provided in the purchase specification.
4) When the fittings are reducing,the structure sizes shall be same as the ones of the straight fittings and B J D shall be machined per the according reducing ends.
5) Fittings can also be manufactured as the mixed connectings of SW and THRD.
Socket Weld Cross Weight Chart in KG
DN | NPS | 3000 | 6000 | 9000 |
6 | 1/8 | 01.5 | 0.21 | - |
8 | 1/4 | 0.17 | 0.25 | - |
10 | 3/8 | 0.19 | 0.54 | - |
15 | 1/2 | 0.46 | 0.64 | 1.32 |
20 | 3/4 | 0.59 | 1.09 | 2.25 |
25 | 1 | 0.81 | 1.97 | 2.69 |
32 | 1-1/4 | 1.19 | 2.34 | 4.68 |
40 | 1-1/2 | 1.67 | 3.9 | 7.84 |
50 | 2 | 2.59 | 6.15 | 10.5 |
65 | 2-1/2 | 4.95 | - | - |
80 | 3 | 7.25 | - | - |
100 | 4 | 18.8 | - | - |
Socket weld cross is also called socket weld four-way fitting that used to make three 90 degree branches from main run pipeline. Both equal and reducing crosses are in various size, dimensions and material. The Socket Weld Fittings Section is designed to hold the various sizes of the pipes it has to be attached to.
Socket Weld Fittings are a family of high pressure forging fittings that used only in conjunction with ANSI Pipe and are available in the same size range.
Even though there are some similarities between the shapes of the two welds, but socket weld is still considered to be different from a fillet weld.
ASME B16.11 Socket Weld Cross Tee Size
Type | Socket Weld Equal and Reducing Cross Tee |
Size Range | 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" |
Pressure Rating | Class 3000 / 6000 / 9000, 3M / 6M / 9M, 3000 LBS / 6000LBS / 9000LBS |
Socket Weld Cross Material
Carbon Steel Grades
ASTM A105 / A105N, A350 LF2/LF3, A694 F42 / F46 / F56 / F60 / F65
Alloy Steel Grades
ASTM A182 F5 / F9 / F11 / F12 / F22 / F91 / F92
Stainless Steel Grades
ASTM A182 F304/304L/304H, F316/316L, F321, F310S, F317, F347, F904L
Duplex Stainless Steel Grades
ASTM A182 F51 / F53 / F44 / F55
ASME B16.11 Socket Weld Cross Dimensions
DN |
NPS | B | D | C | J | ||||||||
3000 | 6000 | 9000 | 3000 | 6000 | 9000 | ||||||||
6 | 1/8 | 10.9 | 6.1 | 3.2 | - | 3.18 | 3.18 | 3.96 | 3.43 | - | - | 9.5 | |
8 | 1/4 | 14.3 | 8.5 | 5.6 | - | 3.78 | 3.30 | 4.60 | 4.01 | - | - | 9.5 | |
10 | 3/8 | 17.7 | 11.8 | 8.4 | - | 4.01 | 3.50 | 5.03 | 4.37 | - | - | 9.5 | |
15 | 1/2 | 21.9 | 15.0 | 11.0 | 5.6 | 4.67 | 4.09 | 5.97 | 5.18 | - | - | 9.5 | |
20 | 3/4 | 27.3 | 20.2 | 14.8 | 10.3 | 4.90 | 4.27 | 6.96 | 6.04 | 9.78 | 8.56 | 12.5 | |
25 | 1 | 34.0 | 25.9 | 19.9 | 14.4 | 5.69 | 4.98 | 7.92 | 6.93 | 11.38 | 9.96 | 12.5 | |
32 | 11/4 | 42.8 | 34.3 | 28.7 | 22.0 | 6.07 | 5.28 | 7.92 | 6.93 | 12.14 | 10.62 | 12.5 | |
40 | 11/2 | 48.9 | 40.1 | 33.2 | 27.2 | 6.35 | 5.54 | 8.92 | 7.80 | 12.7 | 11.12 | 12.5 | |
50 | 2 | 61.2 | 51.7 | 42.1 | 37.4 | 6.93 | 6.04 | 10.92 | 9.50 | 13.84 | 12.12 | 16.0 | |
65 | 21/2 | 73.9 | 61.2 | - | - | 8.76 | 7.62 | - | - | - | - | 16.0 | |
80 | 3 | 89.9 | 76.4 | - | - | 9.52 | 8.30 | - | - | - | - | 16.0 | |
100 | 4 | 115.5 | 100.7 | - | - | 10.69 | 9.35 | - | - | - | - | 19.0 |
1) The even thickness around the socket bore shall not be less than the average value, the thickness at partial areas can be the min. one.
2) Considering the tolerance of outside diameter of pipe, the diameters of some socket bore can be a little larger than the ones specified in B16.11.
3) When the sizes of the connecting pipes aren t conformed to the ones specified in this catalog, the sizes of the connecting pipes shall be provided in the purchase specification.
4) When the fittings are reducing,the structure sizes shall be same as the ones of the straight fittings and B J D shall be machined per the according reducing ends.
5) Fittings can also be manufactured as the mixed connectings of SW and THRD.
Socket Weld Cross Weight Chart in KG
DN | NPS | 3000 | 6000 | 9000 |
6 | 1/8 | 01.5 | 0.21 | - |
8 | 1/4 | 0.17 | 0.25 | - |
10 | 3/8 | 0.19 | 0.54 | - |
15 | 1/2 | 0.46 | 0.64 | 1.32 |
20 | 3/4 | 0.59 | 1.09 | 2.25 |
25 | 1 | 0.81 | 1.97 | 2.69 |
32 | 1-1/4 | 1.19 | 2.34 | 4.68 |
40 | 1-1/2 | 1.67 | 3.9 | 7.84 |
50 | 2 | 2.59 | 6.15 | 10.5 |
65 | 2-1/2 | 4.95 | - | - |
80 | 3 | 7.25 | - | - |
100 | 4 | 18.8 | - | - |