 |
Size Range: 1/8” – 4” / DN6 - DN100
Pressure Rating: Class 3000lbs, 6000lbs
Standard: ASME B16.11, BS3799, EN 10241
| Quantity: | |
|---|---|
ANSI/ASME B16.11 threaded cap fitting is screwed to the end of pipeline, it has same function as plugs. The difference is female / male thread and weight & dimensions. It is similar to the blind plate in form, but the blind plate can be moved and removed, while the pipe cap cannot be removed.
Forged threaded end caps are generally conform to material of ASTM A105 / A182 and dimensions of ASME / ANSI B16.11. They are used to protect the pipe ends in different shapes. Compare with threaded elbow, threaded tee and threaded coupling, it is not used too much dut to its function.
Our carbon steel and stainless steel threaded cap is widely used in the industires as below. It has good resistance corrosion, tensile and yield strength.
Bolier
Shipbuilding
Electric Industries
Chemical Industries
Gas Processing Industries
Food Processing Industries
Power Generation Industries
Petroleum and Naturalgas Industries
Threaded Cap Plugs
For ASME B16.11 cap and threaded plug, they have same funcation. The difference is the thread type that female and male. The ANSI B16.11cap is used to connect the pipe end in external thread, while the plug is matched with pipe end in internal thread.
| Size | 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" |
| Pressure | Class 3000, 6000, 3M, 6M |
| Standard | ASME B16.11, BS3799 |
| Material | Carbon Steel, Alloy Steel, Stainless Steel, Duplex and Super Duplex Steel. |
ASME B16.11 Threaded Cap Fitting Dimensions
| Nominal Size | End-to-End | Outside Diameter | End Wall | Length of Thread | |||||
| DN | NPS | P | D | Gmin | L 5 min | L 2 min | |||
| 3000 | 6000 | 3000 | 6000 | 3000 | 6000 | ||||
| 6 | 1/8 | 19 | - | 16 | 22 | 4.8 | - | 6.4 | 6.7 |
| 8 | 1/4 | 25 | 27 | 19 | 25 | 4.8 | 6.4 | 8.1 | 10.2 |
| 10 | 3/8 | 25 | 27 | 22 | 32 | 4.8 | 6.4 | 9.1 | 10.4 |
| 15 | 1/2 | 32 | 33 | 28 | 38 | 6.4 | 7.9 | 10.9 | 13.6 |
| 20 | 3/4 | 37 | 38 | 35 | 44 | 6.4 | 7.9 | 12.7 | 13.9 |
| 25 | 1 | 41 | 43 | 44 | 57 | 9.7 | 11..2 | 14.7 | 17.3 |
| 32 | 1-1/4 | 44 | 46 | 57 | 64 | 9.7 | 11.2 | 17 | 18 |
| 40 | 1-1/2 | 44 | 48 | 64 | 76 | 11.2 | 12.7 | 17.8 | 18.4 |
| 50 | 2 | 48 | 51 | 76 | 92 | 12.7 | 15.7 | 19.0 | 19.2 |
| 65 | 2-1/2 | 60 | 64 | 92 | 108 | 15.7 | 19.0 | 23.6 | 28.9 |
| 80 | 3 | 65 | 68 | 108 | 127 | 19.0 | 22.4 | 25.9 | 30.5 |
| 100 | 4 | 68 | 75 | 140 | 159 | 22.4 | 28.4 | 27.7 | 33.0 |
ASME B16.11 Threaded End Cap Weight Chart in KG
| NOMINAL SIZE | WEIGHT | ||
| DN | NPS | 3000 | 6000 |
| 6 | 1/8 | 0.03 | / |
| 8 | 1/4 | 0.05 | 0.11 |
| 10 | 3/8 | 0.07 | 0.17 |
| 15 | 1/2 | 0.14 | 0.29 |
| 20 | 3/4 | 0.24 | 0.42 |
| 25 | 1 | 0.41 | 0.76 |
| 32 | 1-1/4 | 0.71 | 0.96 |
| 40 | 1-1/2 | 0.88 | 1.42 |
| 50 | 2 | 1.25 | 2.24 |
| 65 | 2-1/2 | 2.29 | 3.80 |
| 80 | 3 | 3.29 | 5.43 |
| 100 | 4 | 5.65 | 9.26 |
ANSI/ASME B16.11 threaded cap fitting is screwed to the end of pipeline, it has same function as plugs. The difference is female / male thread and weight & dimensions. It is similar to the blind plate in form, but the blind plate can be moved and removed, while the pipe cap cannot be removed.
Forged threaded end caps are generally conform to material of ASTM A105 / A182 and dimensions of ASME / ANSI B16.11. They are used to protect the pipe ends in different shapes. Compare with threaded elbow, threaded tee and threaded coupling, it is not used too much dut to its function.
Our carbon steel and stainless steel threaded cap is widely used in the industires as below. It has good resistance corrosion, tensile and yield strength.
Bolier
Shipbuilding
Electric Industries
Chemical Industries
Gas Processing Industries
Food Processing Industries
Power Generation Industries
Petroleum and Naturalgas Industries
Threaded Cap Plugs
For ASME B16.11 cap and threaded plug, they have same funcation. The difference is the thread type that female and male. The ANSI B16.11cap is used to connect the pipe end in external thread, while the plug is matched with pipe end in internal thread.
| Size | 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" |
| Pressure | Class 3000, 6000, 3M, 6M |
| Standard | ASME B16.11, BS3799 |
| Material | Carbon Steel, Alloy Steel, Stainless Steel, Duplex and Super Duplex Steel. |
ASME B16.11 Threaded Cap Fitting Dimensions
| Nominal Size | End-to-End | Outside Diameter | End Wall | Length of Thread | |||||
| DN | NPS | P | D | Gmin | L 5 min | L 2 min | |||
| 3000 | 6000 | 3000 | 6000 | 3000 | 6000 | ||||
| 6 | 1/8 | 19 | - | 16 | 22 | 4.8 | - | 6.4 | 6.7 |
| 8 | 1/4 | 25 | 27 | 19 | 25 | 4.8 | 6.4 | 8.1 | 10.2 |
| 10 | 3/8 | 25 | 27 | 22 | 32 | 4.8 | 6.4 | 9.1 | 10.4 |
| 15 | 1/2 | 32 | 33 | 28 | 38 | 6.4 | 7.9 | 10.9 | 13.6 |
| 20 | 3/4 | 37 | 38 | 35 | 44 | 6.4 | 7.9 | 12.7 | 13.9 |
| 25 | 1 | 41 | 43 | 44 | 57 | 9.7 | 11..2 | 14.7 | 17.3 |
| 32 | 1-1/4 | 44 | 46 | 57 | 64 | 9.7 | 11.2 | 17 | 18 |
| 40 | 1-1/2 | 44 | 48 | 64 | 76 | 11.2 | 12.7 | 17.8 | 18.4 |
| 50 | 2 | 48 | 51 | 76 | 92 | 12.7 | 15.7 | 19.0 | 19.2 |
| 65 | 2-1/2 | 60 | 64 | 92 | 108 | 15.7 | 19.0 | 23.6 | 28.9 |
| 80 | 3 | 65 | 68 | 108 | 127 | 19.0 | 22.4 | 25.9 | 30.5 |
| 100 | 4 | 68 | 75 | 140 | 159 | 22.4 | 28.4 | 27.7 | 33.0 |
ASME B16.11 Threaded End Cap Weight Chart in KG
| NOMINAL SIZE | WEIGHT | ||
| DN | NPS | 3000 | 6000 |
| 6 | 1/8 | 0.03 | / |
| 8 | 1/4 | 0.05 | 0.11 |
| 10 | 3/8 | 0.07 | 0.17 |
| 15 | 1/2 | 0.14 | 0.29 |
| 20 | 3/4 | 0.24 | 0.42 |
| 25 | 1 | 0.41 | 0.76 |
| 32 | 1-1/4 | 0.71 | 0.96 |
| 40 | 1-1/2 | 0.88 | 1.42 |
| 50 | 2 | 1.25 | 2.24 |
| 65 | 2-1/2 | 2.29 | 3.80 |
| 80 | 3 | 3.29 | 5.43 |
| 100 | 4 | 5.65 | 9.26 |
