Phone:(+86) 18625862121
Email:order@zzsteels.com
productsbanner
You are here: Home » Products » Threaded Pipe Fittings » ASME B16.11 Threaded Elbow
Tel:(+86)372-2155516
 
Mobile: (+86)18625862121
 
 
Contact: Jerry Zhao
 
Address: No 888 Xigangshen Road Jiading Shanghai
 

Size Range: 1/2" -  80" / DN15 - 2000

Thickness Schedule: SCH 10 - SCH 160, XXS

 

Standard: ANSI / ASME B16.9 / MSS SP 43

0
0

Size Range: 1/2" -  80" / DN15 - 2000


Thickness Schedule: SCH 10 - SCH 160, XXS


Standard: ANSI / ASME B16.9 / MSS SP 43
 

0
0

Size Range: 1/2" - 48" / DN15 - 1200

Thickness Schedule: SCH 10 - SCH 160, XXS


Standard: ANSI / ASME B16.9

0
0

We are a manufacturer, supplier and exporter of ASME B16.9 butt weld equal and reducing tee in China.

ANSI / ASME B16.9 steel pipe tee dimensions and weight chart is free for you.

0
0

Shape Type: Equal and Reducing 

Size Range: 1/2" - 80" / DN15 - 2000

Thickness Schedule: SCH 10 - SCH 160, XXS

Standard: ANSI / ASME B16.9

0
0

Type: Long Pattern (LP) and Short Pattern (SP)

Size Range: 1/2” - 24” / DN15 - 600

Thickness Schedule: SCH 10 - SCH 160, XXS

0
0

Size Range: 3/4" - 60" / DN20 - 1500

Thickness Schedule: SCH 10 - SCH 160, XXS

Standard: ANSI / ASME B16.9 / MSS SP 43

0
0

Size Range: 3/4" - 60" / DN20 - 1500

Thickness Schedule: SCH 10 - SCH 160, XXS

Standard: ANSI / ASME B16.9 & MSS SP-43

0
0

Size Range: 1/2" - 48" / DN15 - 1200

Thickness Schedule: SCH 10 - SCH 160, XXS

Standard: ANSI / ASME B16.9

0
0

Type: 90 Degree and 45 Degree

Shape: Straight and Reducing Elbow

Size: 1/8” – 4” / DN6 - DN100

0
0

Shape: Equal and Reducing Tee

Size: 1/8"- 4" / DN6 - DN100

Pressure: Class 3000LBS, 6000Lbs, 9000lbs.

Standard: ASME B16.11, BS3799

0
0

Shape: Equal Cross Tee and Reducing Cross Tee

Size Range: 1/8” – 4” / DN6 - DN100

Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs.

Standard: GB/T 14383, ASME B16.11, BS3799

0
0

Type: Full Coupling and Half Coupling

Shape: Straight Coupling and Reducing Coupling

Size Range: 1/8” – 4” / DN6 - DN100

Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs

0
0

Size Range: 1/8” - 3” / DN6 - DN80

Pressure Rating: Class 3000lbs


Standard: MSS SP-83

0
0

Type: 90 Degree and 45 Degree Elbow

Shape: Straight and Reducing Elbow

Thread Type: NPT, PT, BSPP, BSPT, PF

0
0

Shape: Equal and Reducing Tee

Size Range: 1/8” – 4” / DN6 - DN100

 

Pressure Rating: Class 2000 lbs, 3000 lbs, 6000 lbs

0
0

Shape: Equal and Reducing

Size: 1/8" -  4" / DN6 - DN100

 

Pressure: Class 2000 lbs, 3000 lbs, 6000 lbs

0
0

Type: Full and Half Coupling

Shape: Straight and Reducing Coupling

Thread Type: NPT, PT, BSPP, BSPT, PF

0
0

Size Range: 1/8” – 4” / DN6 - DN100

Pressure Rating: Class 3000lbs, 6000lbs

 

Standard: ASME B16.11, BS3799, EN 10241

0
0

Size Range: 1/8” - 3” / DN6 - DN80

Pressure Rating: Class 3000lbs

 

Standard: MSS SP-83

0
0

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

ASME B16.11 Threaded Elbow

Type: 90 Degree and 45 Degree Elbow

Shape: Straight and Reducing Elbow

Thread Type: NPT, PT, BSPP, BSPT, PF
Availability:
Quantity:

What is Threaded Steel Pipe Fittings

Threaded pipe fittings provide permanent welded connections for pipes. Threaded joints probably represent the oldest method of joining piping systems.

ASME B16.11 threaded elbow dimensions and weight are designed in ASME B16.11 standard, and in types of  straight & reducing elbow, female/female & male / female elbow, 90 & 45 degree elbow. Their size are from 1/8" to 4" and afford pressure in Class 2000, 3000 & 6000. Compare with butt weld elbow, it has two angle that 90 degree and 45 degree. ASME Threaded Elbow is actually a fitting that is being installed in between the two lengths of tube or a pipe to allow in changing the direction of a flow.

NPT Threaded Type

National Pipe Thread is also called NPT, which is an American standard thread. It may also be refereed to as MPT , MNPT or NPT (M) for male external threads. and FPT, FNPT or NPT(F) for female internal threads. A thread sealant must always be used to achieve a leak free seal (except for NPTF). It is also based on Trade Size rather than actual diameter (similar to BSP in this regard).

ASME B16.11 NPT Threaded Elbow Dimension

threaded elbow

Nominal Size Center-to-End Outside Diameter of Band Wall Thickness Length of Thread
DN NPS A H Gmin L 5 min L 2 min
90°Elbows 45°Elbows
3000 6000 3000 6000 3000 6000 3000 6000
6 1/8 21 25 17 19 22 25 3.18 6.35 6.4 6.7
8 1/4 25 28 19 22 25 33 3.30 6.60 8.1 10.2
10 3/8 28 33 22 25 33 38 3.51 6.98 9.1 10.4
15 1/2 33 39 25 28 38 46 4.09 8.15 10.9 13.6
20 3/4 38 44 28 33 46 56 4.32 8.53 12.7 13.9
25 1 44 51 33 35 56 62 4.98 9.93 14.7 17.3
32 11/4 51 60 35 43 62 75 5.28 10.59 17.0 18.0
40 11/2 60 64 43 44 75 84 5.56 11.07 17.8 18.4
50 2 64 83 44 52 84 102 7.14 12.09 19 19.2
65 21/2 83 95 52 64 102 121 7.65 15.29 23.6 28.9
80 3 95 106 64 79 121 146 8.84 16.64 25.9 30.5
100 4 114 114 79 79 152 152 11.18 18.67 27.7 33

Threaded Elbow Weight Chart in KG

NOMINAL SIZE 90 DEGREE THREADED ELBOW 45 DEGREE THREADED ELBOW
DN NPS 2000 3000 6000 2000 3000 6000
6 1/8 0.08 0.10 0.18 0.08 0.08 0.14
8 1/4 0.08 0.15 0.33 0.08 0.12 0.27
10 3/8 0.13 0.30 0.48 0.11 0.26 0.49
15 1/2 0.22 0.45 0.72 0.23 0.42 0.69
20 3/4 0.32 0.70 1.29 0.29 0.59 1.12
25 1 0.50 1.21 1.65 0.43 0.96 1.47
32 1-1/4 0.80 1.47 2.70 0.67 1.15 2.65
40 1-1/2 0.93 2.60 3.90 0.82 2.02 3.60
50 2 1.60 3.05 6.05 1.32 2.50 4.60
65 2-1/2 2.95 5.80 9.88 3.30 3.81 7.81
80 3 5.6 8.85 16.4 5.4 6.3 13.1
100 4 10.5 14.9 23.5 9.00 9.80 17.0

Forged pipe fitting ASME B16.11 standard

ASME B16.11 is the standard contains ratings, dimensions, tolerances, marking and material requirements for forged fittings, both socket-welding and threaded. Threaded fittings are available in pressure ratings Class 2000, 3000, and 6000;

Threaded Elbow Specification and Material Grade

Size Range

1/8" –  4" / DN6 - DN100

Pressure Rating

Class 2000lbs, 3000lbs, 6000lbs

Thread Type

NPT, PT, BSPP, BSPT, PF

Standard

ASME B16.11

Carbon Steel

ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH

Alloy Steel

ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22

Stainless Steel

ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L,1.4404, 1.4437.

Duplex Stainless Steel

ASTM A182 F51, F53, F44

ASME B16.11 Threaded Fittings Applicatiion

  • Oil and Gas Pipeline

  • Chemical Industry

  • Plumbing

  • Heating

  • Water Supply System

  • Power Plant

  • Paper & Pulp Industry

  • General Purpose Applications

  • Fabrication Industry

  • Food Processing Industry

  • Structural Pipe

Previous: 
Next: 
CONTACT US
Tel: (+86) 372-2155516
Mobile: (+86) 18625862121
Email:order@zzsteels.com
Contact: Jerry Zhao
Address: No 888 Xigangshen Road Jiading Shanghai

QUICK NAVIGATION

WECHAT QR CODE
COPYRIGHT© 2018 SHANGHAI ZHUCHENG PIPE FITTINGS MANUFACTURING CO LTD. ALL RIGHTS RESERVED
TECHNICAL SUPPORT : COVERWEB