 |
| Quantity: | |
|---|---|
Introduction of ASTM A234 WPB Tee
ASTM A234 is the standard of the butt weld pipe fitting material. This is indicating the properties of the material of various kinds of alloy steel and carbon steel. WPB is a steel grade in which W stands for weldable, B is grading B and P stands for pressure.
ASTM A234 tees can combine or divide fluid flow. Tees can connect pipes of different diameters, change the direction of a pipe run, or both. Available in various materials, sizes and finishes, tees may also be used to transport two-fluid mixtures.
In addition, tees can be divided into equal tees and reducing tee. Equal tees having the same diameter in all three ports, whereas reducing tees often have two branches with the same diameter and one branch with a different diameter.
ASME Standard for ASTM A234 Tees
ASME B16.11 is the standard for the forged steel fittings, including socket weld and threaded tees. Material including carbon steel, alloy steel and stainless steel.
ASME B16.9 is the standard for butt weld fittings including tees, reducers, elbows and so on.
Chemical Composition
| CHEMICAL | LIMITS | C | Mn | P | S | Si | Cr | Mo | Ni | Cu | V |
| ASTM A234 WPB | MIN | 0.29 | 0.10 | ||||||||
| MAX | 0.30 | 1.06 | 0.050 | 0.058 | 0.40 | 0.15 | 0.40 | 0.40 | 0.08 |
Mechanical Properties
| MATERIAL | T.S (MPA) | Y.S (MPA) | EL % | R/A % | HARDNESS |
| ASTM A234 WPB | 415 min | 240 min | 22 min | 30 min | 197 max |
Dimension of ASTM A234 Threaded Tee
Inspection of Carbon Steel Tee
Check the marking such as size, material code, grade, thickness, heat No.
Measure the dimensions such as outside diameter, thickness.
Visual the surface of ASTM A234 WPB tee body, such as dents, die marks, porosity etc.
Package
Introduction of ASTM A234 WPB Tee
ASTM A234 is the standard of the butt weld pipe fitting material. This is indicating the properties of the material of various kinds of alloy steel and carbon steel. WPB is a steel grade in which W stands for weldable, B is grading B and P stands for pressure.
ASTM A234 tees can combine or divide fluid flow. Tees can connect pipes of different diameters, change the direction of a pipe run, or both. Available in various materials, sizes and finishes, tees may also be used to transport two-fluid mixtures.
In addition, tees can be divided into equal tees and reducing tee. Equal tees having the same diameter in all three ports, whereas reducing tees often have two branches with the same diameter and one branch with a different diameter.
ASME Standard for ASTM A234 Tees
ASME B16.11 is the standard for the forged steel fittings, including socket weld and threaded tees. Material including carbon steel, alloy steel and stainless steel.
ASME B16.9 is the standard for butt weld fittings including tees, reducers, elbows and so on.
Chemical Composition
| CHEMICAL | LIMITS | C | Mn | P | S | Si | Cr | Mo | Ni | Cu | V |
| ASTM A234 WPB | MIN | 0.29 | 0.10 | ||||||||
| MAX | 0.30 | 1.06 | 0.050 | 0.058 | 0.40 | 0.15 | 0.40 | 0.40 | 0.08 |
Mechanical Properties
| MATERIAL | T.S (MPA) | Y.S (MPA) | EL % | R/A % | HARDNESS |
| ASTM A234 WPB | 415 min | 240 min | 22 min | 30 min | 197 max |
Dimension of ASTM A234 Threaded Tee
Inspection of Carbon Steel Tee
Check the marking such as size, material code, grade, thickness, heat No.
Measure the dimensions such as outside diameter, thickness.
Visual the surface of ASTM A234 WPB tee body, such as dents, die marks, porosity etc.
Package
