Phone:(+86) 18625862121
Email:order@zzsteels.com
productsbanner
You are here: Home » Products » Threaded Pipe Fittings » Class 3000 Threaded Tee
Tel:(+86)372-2155516
 
Mobile: (+86)18625862121
 
 
Contact: Jerry Zhao
 
Address: No 888 Xigangshen Road Jiading Shanghai
 

Size Range: 1/2" -  80" / DN15 - 2000

Thickness Schedule: SCH 10 - SCH 160, XXS

 

Standard: ANSI / ASME B16.9 / MSS SP 43

0
0

Size Range: 1/2" -  80" / DN15 - 2000


Thickness Schedule: SCH 10 - SCH 160, XXS


Standard: ANSI / ASME B16.9 / MSS SP 43
 

0
0

Size Range: 1/2" - 48" / DN15 - 1200

Thickness Schedule: SCH 10 - SCH 160, XXS


Standard: ANSI / ASME B16.9

0
0

We are a manufacturer, supplier and exporter of ASME B16.9 butt weld equal and reducing tee in China.

ANSI / ASME B16.9 steel pipe tee dimensions and weight chart is free for you.

0
0

Shape Type: Equal and Reducing 

Size Range: 1/2" - 80" / DN15 - 2000

Thickness Schedule: SCH 10 - SCH 160, XXS

Standard: ANSI / ASME B16.9

0
0

Type: Long Pattern (LP) and Short Pattern (SP)

Size Range: 1/2” - 24” / DN15 - 600

Thickness Schedule: SCH 10 - SCH 160, XXS

0
0

Size Range: 3/4" - 60" / DN20 - 1500

Thickness Schedule: SCH 10 - SCH 160, XXS

Standard: ANSI / ASME B16.9 / MSS SP 43

0
0

Size Range: 3/4" - 60" / DN20 - 1500

Thickness Schedule: SCH 10 - SCH 160, XXS

Standard: ANSI / ASME B16.9 & MSS SP-43

0
0

Size Range: 1/2" - 48" / DN15 - 1200

Thickness Schedule: SCH 10 - SCH 160, XXS

Standard: ANSI / ASME B16.9

0
0

Type: 90 Degree and 45 Degree

Shape: Straight and Reducing Elbow

Size: 1/8” – 4” / DN6 - DN100

0
0

Shape: Equal and Reducing Tee

Size: 1/8"- 4" / DN6 - DN100

Pressure: Class 3000LBS, 6000Lbs, 9000lbs.

Standard: ASME B16.11, BS3799

0
0

Shape: Equal Cross Tee and Reducing Cross Tee

Size Range: 1/8” – 4” / DN6 - DN100

Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs.

Standard: GB/T 14383, ASME B16.11, BS3799

0
0

Type: Full Coupling and Half Coupling

Shape: Straight Coupling and Reducing Coupling

Size Range: 1/8” – 4” / DN6 - DN100

Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs

0
0

Size Range: 1/8” - 3” / DN6 - DN80

Pressure Rating: Class 3000lbs


Standard: MSS SP-83

0
0

Type: 90 Degree and 45 Degree Elbow

Shape: Straight and Reducing Elbow

Thread Type: NPT, PT, BSPP, BSPT, PF

0
0

Shape: Equal and Reducing Tee

Size Range: 1/8” – 4” / DN6 - DN100

 

Pressure Rating: Class 2000 lbs, 3000 lbs, 6000 lbs

0
0

Shape: Equal and Reducing

Size: 1/8" -  4" / DN6 - DN100

 

Pressure: Class 2000 lbs, 3000 lbs, 6000 lbs

0
0

Type: Full and Half Coupling

Shape: Straight and Reducing Coupling

Thread Type: NPT, PT, BSPP, BSPT, PF

0
0

Size Range: 1/8” – 4” / DN6 - DN100

Pressure Rating: Class 3000lbs, 6000lbs

 

Standard: ASME B16.11, BS3799, EN 10241

0
0

Size Range: 1/8” - 3” / DN6 - DN80

Pressure Rating: Class 3000lbs

 

Standard: MSS SP-83

0
0

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Class 3000 Threaded Tee

Shape: Equal and Reducing Tee

Size Range: 1/8” – 4” / DN6 - DN100

Pressure Rating: Class 2000 lbs, 3000 lbs, 6000 lbs
Availability:
Quantity:

What is a Threaded Tee

ASME B16.11 Class 3000 threaded tee is a "T" type pipe fitting. The branch pipe has two outlets and is perpendicular to the main pipe. It is used to change the direction of the pipe so that the pipe is 90 degrees perpendicular to the pipe.

Threaded tee, the most common pipe fitting, is used to combine (or divide) fluid flow. The threaded stainless tee fitting comes with three openings, a wye joins (or creates) branch lines. Usually it is a fitting in which the side inlet pipe enters at a 90-degree angle, or an angle other than 90 degrees.

Class 3000 threaded tee have applications in many industries,including chemical processing, petroleum, refining, marine waste treatment, utilities / power generation, industrial equipment, natural gas compression and distribution industries. Tee pipe is also recommended for industrial equipment hydrodynamic system.

Specification for threaded Tee

Class 3000 threaded tee is mainly used for small pipe size whose nominal diameter is NPS4 and smaller. It has three holes that named as one inlet and two outlets or two inlets and one outlet. Tees are suitable for piping systems to transport two phase fluid mixtures.

Shape

Equal and reducing Tee

Thread type

NPT/PT/BSPP/BSPT/PF

Size range

1/8"- 4"/DN6-DN100

Pressure

Class2000lbs/3000lbs/6000lbs

Standard

ASME B16.11,BS3799

Material

CS/LOW TEMP CS/PIPELINE/ALLOY STEEL/SS/DUPLEX SS

Class 3000 of Thread Fittings

Class 3000 comes under a pressure class of fittings. A class 3000 fitting is deemed fit for higher pressure service conditions. These fittings have good strength and can handle elevated temperature systems.

The Class 3000 stainless steel fittings are employed to influence the characteristics of the flow in the piping system. These fittings are designed in different shapes. A Cl 3000 elbow is used to change the direction of the flow in the system. These elbows can be designed in 45, 90, and 180 degree specifications. A class 3000 reducer, on the contrary, is used to join piping equipment of dissimilar sizes. These reducers can be seen in the class 3000 reducing tee.The class 3000 threaded fittings are roughly related to the schedule 160 grade. The fittings are designed to handle 3000psi of pressure. As the temperature in the CL 3000 adapters increases, their pressure holding capacity decreases.

Tapered vs straight threads of 3000lb threaded pipe fittings

Tapered and straight threads are two thread types of the 3000 lb threaded fittings. Both these threads can be differentiated in some features. A straight or parallel thread has straight walls. Threads on a tapered 3000lb threaded elbow is taped and designed at 2 degree angle. This ensures that they eventually meet at the end of the connection.

ASME B16.11 Specification for Thread Tee

ASME B16.11 is the standard for the forged steel thread fittings, this standard contains pressure-temperature ratings, dimensions, tolerances, markings and material requirements for forged and threaded forged fittings. Material including carbon steel, alloy steel and stainless steel. Also described as Class 2000, 3000, 6000 threaded end fittings .Forged threaded tee fitting can be divided into equal and reducing tee, They are mainly used for small pipe size whose nominal diameter is NPS 2 and smaller.

Forged Steel Threaded Tee Weight Chart in KG

NOMINAL SIZE

THREADED PIPE TEE WEIGHT

DN

NPS

2000

3000

6000

6

1/8

0.13

0.22

0.35

8

1/4

0.13

0.22

0.57

10

3/8

0.16

0.40

0.66

15

1/2

0.35

0.58

1.15

20

3/4

0.45

0.90

1.80

25

1

0.66

1.46

2.25

32

1-1/4

1.00

1.90

3.95

40

1-1/2

1.40

3.40

4.87

50

2

2.20

3.80

8.89

65

2-1/2

4.20

7.20

12.8

80

3

6.15

10.7

21.6

100

4

14.7

17.9

29.5

Previous: 
Next: 
CONTACT US
Tel: (+86) 372-2155516
Mobile: (+86) 18625862121
Email:order@zzsteels.com
Contact: Jerry Zhao
Address: No 888 Xigangshen Road Jiading Shanghai

QUICK NAVIGATION

WECHAT QR CODE
COPYRIGHT© 2018 SHANGHAI ZHUCHENG PIPE FITTINGS MANUFACTURING CO LTD. ALL RIGHTS RESERVED
TECHNICAL SUPPORT : COVERWEB