 |
| Quantity: | |
|---|---|
What is Stainless Steel Threaded Tee
Stainless steel threaded tee is used to combine (or divide) fluid flow. The threaded stainless steel tee comes with three openings. Usually it is a fitting in which the side inlet pipe enters at a 90-degree angle, or an angle other than 90 degrees.
Tees can connect pipes of different diameters, change the direction of a pipe run, or both. Available in various materials, sizes and finishes, they may also be used to transport two-fluid mixtures.
Threaded fittings are screwed on fittings. It is typically used for less critical piping systems such as water distribution or for low pressure installations that are not subject to vibrations, elongations and bending forces.
Type | EQUAL TEE、REDUCING TEE |
Size | 1/8"-4"/DN6-DN100 |
Pressure | CLASS 2000、3000、6000 |
Thread type | NPT、PT、BSPP、BSPT |
Stainless steel | ASTM A182 F304/304L/304H、316/316L、310S、317、347、904L |
Duplex stainless steel | ASTM A182 F51、F53、F55 |
Common Thread Types of Threaded Fittings
BSPP: British Standard Pipe Parallel
BSPT: British Standard Pipe Tapered
NPT: American National Standard Pipe Tpaer
Dimension of Threaded Tee
| GB/T 14383、ASME B16.11 | ||||||||||||
| Nominal Size | Center-to-End | Outside Diameter of Band | Wall Thickness | Length of Thread | ||||||||
| DN | NPS | A | H | G min | L 5min | L 2min | ||||||
| Tees | ||||||||||||
| 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | ||||
| 6 | 1/8 | 21 | 21 | 25 | 22 | 22 | 25 | 3.18 | 3.18 | 6.35 | 6.4 | 6.7 |
| 8 | 1/4 | 21 | 25 | 28 | 22 | 25 | 33 | 3.18 | 3.3 | 6.6 | 8.1 | 10.2 |
| 10 | 3/8 | 25 | 28 | 33 | 25 | 33 | 38 | 3.18 | 3.51 | 6.98 | 9.1 | 10.4 |
| 15 | 1/2 | 28 | 33 | 38 | 33 | 38 | 46 | 3.18 | 4.09 | 8.15 | 10.9 | 13.6 |
| 20 | 3/4 | 33 | 38 | 44 | 38 | 46 | 56 | 3.18 | 4.32 | 8.53 | 12.7 | 13.9 |
| 25 | 1 | 38 | 44 | 51 | 46 | 56 | 62 | 3.68 | 4.98 | 9.93 | 14.7 | 17.3 |
| 32 | 1-1/4 | 44 | 51 | 60 | 56 | 62 | 75 | 3.89 | 5.28 | 10.59 | 17 | 18 |
| 40 | 1-1/2 | 51 | 60 | 64 | 62 | 75 | 84 | 4.01 | 5.56 | 11.07 | 17.8 | 18.4 |
| 50 | 2 | 60 | 64 | 83 | 75 | 84 | 102 | 4.27 | 7.14 | 12.09 | 19 | 19.2 |
| 65 | 2-1/2 | 76 | 83 | 95 | 92 | 102 | 121 | 5.61 | 7.65 | 15.29 | 23.6 | 28.9 |
| 80 | 3 | 86 | 95 | 106 | 109 | 121 | 146 | 5.99 | 8.84 | 16.64 | 25.9 | 30.5 |
| 100 | 4 | 106 | 114 | 114 | 146 | 152 | 152 | 6.55 | 11.18 | 18.67 | 27.7 | 33 |
Weight Chart of Threaded Tee
| DN | NPS | 2000 | 3000 | 6000 |
| 6 | 1/8 | 0.13 | 0.22 | 0.35 |
| 8 | 1/4 | 0.13 | 0.22 | 0.57 |
| 10 | 3/8 | 0.16 | 0.4 | 0.66 |
| 15 | 1/2 | 0.35 | 0.58 | 1.15 |
| 20 | 3/4 | 0.45 | 0.9 | 1.8 |
| 25 | 1 | 0.66 | 1.46 | 2.25 |
| 32 | 1-1/4 | 1 | 1.9 | 3.95 |
| 40 | 1-1/2 | 1.4 | 3.4 | 4.87 |
| 50 | 2 | 2.2 | 3.8 | 8.89 |
| 65 | 2-1/2 | 4.2 | 7.2 | 12.8 |
| 80 | 3 | 6.15 | 10.7 | 21.6 |
| 100 | 4 | 14.7 | 17.9 | 29.5 |
Application
When choosing pipe fittings, material is always critical. Stainless steel shows excellent protection against corrosion and rust, something which could prove hugely troublesome within water and gas pipes. Brass and copper pipes wouldn't have the same resistance to these kinds of issues. Outlining the reasons why stainless steel is the preferred plumbers choice for threaded fittings.
Stainless steel tee can be applied in many areas including water, gas, and oil pipelines. Stainless steel pipe tees are pipe connectors used to joint stainless steel pipes and other equipment.
Package of Stainless Steel Threaded Tee
1.Wrapping PVC on the threaded tee fitting.
2.Packing stainless steel threaded tee into carton.
3.Marking and recording the list for each carton.
4.Putting all cartons into wooden box in line.
5.Sticking shipping marking on the wooden box.
Advanagtes of ASME B16.11 Treaded Tee
High Quality
Fast Delivery
Reasonable Price
ISO 9001 Certified
Photo in Record
Sample for Free
Strong Package
Strictly Inspection
Professional Service
What is Stainless Steel Threaded Tee
Stainless steel threaded tee is used to combine (or divide) fluid flow. The threaded stainless steel tee comes with three openings. Usually it is a fitting in which the side inlet pipe enters at a 90-degree angle, or an angle other than 90 degrees.
Tees can connect pipes of different diameters, change the direction of a pipe run, or both. Available in various materials, sizes and finishes, they may also be used to transport two-fluid mixtures.
Threaded fittings are screwed on fittings. It is typically used for less critical piping systems such as water distribution or for low pressure installations that are not subject to vibrations, elongations and bending forces.
Type | EQUAL TEE、REDUCING TEE |
Size | 1/8"-4"/DN6-DN100 |
Pressure | CLASS 2000、3000、6000 |
Thread type | NPT、PT、BSPP、BSPT |
Stainless steel | ASTM A182 F304/304L/304H、316/316L、310S、317、347、904L |
Duplex stainless steel | ASTM A182 F51、F53、F55 |
Common Thread Types of Threaded Fittings
BSPP: British Standard Pipe Parallel
BSPT: British Standard Pipe Tapered
NPT: American National Standard Pipe Tpaer
Dimension of Threaded Tee
| GB/T 14383、ASME B16.11 | ||||||||||||
| Nominal Size | Center-to-End | Outside Diameter of Band | Wall Thickness | Length of Thread | ||||||||
| DN | NPS | A | H | G min | L 5min | L 2min | ||||||
| Tees | ||||||||||||
| 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | 2000 | 3000 | 6000 | ||||
| 6 | 1/8 | 21 | 21 | 25 | 22 | 22 | 25 | 3.18 | 3.18 | 6.35 | 6.4 | 6.7 |
| 8 | 1/4 | 21 | 25 | 28 | 22 | 25 | 33 | 3.18 | 3.3 | 6.6 | 8.1 | 10.2 |
| 10 | 3/8 | 25 | 28 | 33 | 25 | 33 | 38 | 3.18 | 3.51 | 6.98 | 9.1 | 10.4 |
| 15 | 1/2 | 28 | 33 | 38 | 33 | 38 | 46 | 3.18 | 4.09 | 8.15 | 10.9 | 13.6 |
| 20 | 3/4 | 33 | 38 | 44 | 38 | 46 | 56 | 3.18 | 4.32 | 8.53 | 12.7 | 13.9 |
| 25 | 1 | 38 | 44 | 51 | 46 | 56 | 62 | 3.68 | 4.98 | 9.93 | 14.7 | 17.3 |
| 32 | 1-1/4 | 44 | 51 | 60 | 56 | 62 | 75 | 3.89 | 5.28 | 10.59 | 17 | 18 |
| 40 | 1-1/2 | 51 | 60 | 64 | 62 | 75 | 84 | 4.01 | 5.56 | 11.07 | 17.8 | 18.4 |
| 50 | 2 | 60 | 64 | 83 | 75 | 84 | 102 | 4.27 | 7.14 | 12.09 | 19 | 19.2 |
| 65 | 2-1/2 | 76 | 83 | 95 | 92 | 102 | 121 | 5.61 | 7.65 | 15.29 | 23.6 | 28.9 |
| 80 | 3 | 86 | 95 | 106 | 109 | 121 | 146 | 5.99 | 8.84 | 16.64 | 25.9 | 30.5 |
| 100 | 4 | 106 | 114 | 114 | 146 | 152 | 152 | 6.55 | 11.18 | 18.67 | 27.7 | 33 |
Weight Chart of Threaded Tee
| DN | NPS | 2000 | 3000 | 6000 |
| 6 | 1/8 | 0.13 | 0.22 | 0.35 |
| 8 | 1/4 | 0.13 | 0.22 | 0.57 |
| 10 | 3/8 | 0.16 | 0.4 | 0.66 |
| 15 | 1/2 | 0.35 | 0.58 | 1.15 |
| 20 | 3/4 | 0.45 | 0.9 | 1.8 |
| 25 | 1 | 0.66 | 1.46 | 2.25 |
| 32 | 1-1/4 | 1 | 1.9 | 3.95 |
| 40 | 1-1/2 | 1.4 | 3.4 | 4.87 |
| 50 | 2 | 2.2 | 3.8 | 8.89 |
| 65 | 2-1/2 | 4.2 | 7.2 | 12.8 |
| 80 | 3 | 6.15 | 10.7 | 21.6 |
| 100 | 4 | 14.7 | 17.9 | 29.5 |
Application
When choosing pipe fittings, material is always critical. Stainless steel shows excellent protection against corrosion and rust, something which could prove hugely troublesome within water and gas pipes. Brass and copper pipes wouldn't have the same resistance to these kinds of issues. Outlining the reasons why stainless steel is the preferred plumbers choice for threaded fittings.
Stainless steel tee can be applied in many areas including water, gas, and oil pipelines. Stainless steel pipe tees are pipe connectors used to joint stainless steel pipes and other equipment.
Package of Stainless Steel Threaded Tee
1.Wrapping PVC on the threaded tee fitting.
2.Packing stainless steel threaded tee into carton.
3.Marking and recording the list for each carton.
4.Putting all cartons into wooden box in line.
5.Sticking shipping marking on the wooden box.
Advanagtes of ASME B16.11 Treaded Tee
High Quality
Fast Delivery
Reasonable Price
ISO 9001 Certified
Photo in Record
Sample for Free
Strong Package
Strictly Inspection
Professional Service
